Dec 24, 2022 · Use the 19mm open wrench to loosen the white drain bolt. Make sure your drain container catches the coolant as some will leak from the spigot drain bolt as well.

Aug 2, 2025 · The minimum brake rotor thickness for the front and back rotors on a 1992 Honda Accord is 21mm. Rotors which are below this thickness will not offer adequate or reliable braking.

Jul 25, 2025 · On the thermostat housing, where upper radiator attaches, there are two thermosensors, with electrical connections and a 19mm plug in between them.

Dec 23, 2022 · 3. take rear brake calipers off , (1/2 inch 19mm socket works best) Undo the 2 bolts holding caliper on.

Sep 15, 2023 · for the brackets there are two T-55 torx female headed bolts in front and two 19mm or 3/4" male hexagonal nuts in the rear over two male torx-headed bolts.

Sep 22, 2023 · A US cent (penny) is 1.905 cm wide. A dime is 1.791 cm wide.The diameter of a U.S. penny is 19mm, the thickness is 1.55mm. The diameter of a dime is 17.9mm with a …

Oct 25, 2022 · Again, this takes a lot of force and you need to use a socket (or wrench) on one side to hold the bolt while you use a socket (19mm and 17mm) to take off the nut and bolt.

Apr 12, 2025 · Error code P-04 on a Nissan forklift typically indicates a problem related to the vehicle's battery or electrical system. This could involve low battery voltage ...

Oct 22, 2022 · To replace the belt tensioner on a 2001 Toyota RAV4, first, ensure the engine is off and cool. Remove the serpentine belt by using a wrench to relieve tension on the tensioner …

Oct 25, 2022 · 19mm deep socket for wheelnuts, 7mm Allen wrench to remove caliper bolts, 8" c clamp to push piston back into caliper housing